Water is a valuable resource, used for multiple purposes, including drinking water. Hence, water should be used judiciously. Everyone should understand that a small amount of water saved by an individual can help in mass conservation, so the responsibility lies on each one of us to conserve water. With the increase in population, every drop of water counts now. Therefore, it's important to bring daily changes because the smallest changes in the consumption pattern can help save water. In this blog, we have covered hacks to save and use water efficiently.
7 Water-Saving Hacks for the Bathroom
Water-saving hacks are essential because every drop of water saved can be left for your future generations. Here are several hacks or tips to save water in the bathroom.
1. Have a Shower Instead of a Bath
Bathing is relaxing and soothing for muscles, but more water is used in bathing than in a shower. A bath uses between 40 to 50 gallons, a shower requires around 10 to 16 gallons of water, and a full bathtub covers up to 66 gallons of water.
Additionally, showers eventually heat the water, but a hot water bath needs more fuel to heat the water. Thus, showers save energy more than a hot bath.
2. Have Shorter Showers
A shorter shower indeed helps to save water. On average, people use 2.5 to 3 gallons of water every minute to take showers. In addition to that, showering for more than 10 minutes leads to the loss of 25 gallons of water. Thus, it's essential to take shorter showers.
3. Set Up a Water-Saving Shower Head
A water-saving shower head can greatly lower the water flow in the shower. As compared to traditional shower heads, consider water-saving versions that deliver the water flow rate of 1.5 to 2.0 gallons per minute, depending on the model. Most of the models feature a stop button or different intensities. Additionally, you can decrease the water flow rate by using special tap enhancement solutions. This can save a significant amount of water in the bathroom.
4. Use a Dual-Flush Actuator or Flush-Stop When Flushing the Toilet
On average, 2 gallons of water are used in the toilet with each flush. However, modern flush solutions can save water significantly. Consider installing a dual-flush actuator plate, which lowers the use of water to less than 1 gallon.
Consult your plumber for the optimal setup of the toilet. Alternatively, opt for the flush-stop pushbutton instead of dual-flush actuator plates to manually restrict the flushing process and save water on a large scale.
5. Turn Off the Faucet When Not in Use
Water is usually needed at the beginning and the end of brushing the teeth, washing your hands, or shaving. There is no need to keep the water running during these activities. This leads to the wastage of water. Ensure to turn off the faucet temporarily to save a considerable amount of water.
6. Use Cold Water Instead of Hot Water
Opt for cold water for quick tasks like washing your hands. This saves water and energy to heat the water. Additionally, ensure to use cold water while the water is being heated for big tasks.
7. Fix Leaking Faucets
A leaking faucet wastes a considerable amount of water. This is mainly caused by a dirty or worn seal. Ensure to clean or replace the seal to save on water and the bill.
How to Save and Use Water Efficiently?
Here are some tips to save water and use it efficiently at different places in the bathroom:
Shower
- Collect the water in a bucket while waiting for the shower to heat up. Use it to water the plants, clean the house or even wash the car.
- Brush your teeth in the shower to make use of the already running water.
Bathtub
- Ensure to check that the bathtub faucet isn't leaking or dripping after being turned off.
Sink
- Collect the water in the sink while shaving to rinse the blade instead of using running water.
Toilet
- Never use the toilet to dispose of garbage as it can waste water and clog the pipes.
- Always repair a running toilet immediately. An average running toilet can waste a gallon of water per 30 seconds.
Final Words
Water conservation has become an important element of today's lives. You should understand the importance of judicious use of water to ensure there's a sufficient amount left for future generations. One of the ways to conserve water is its proper and efficient use, especially in the bathroom.
